- Compatibility
- iOS Devices
- iPhone 7, 6 Plus, 6, 5s, 5c, 5, 4s, iPod touch (5th gen)
- iPad Air 2, iPad Air, iPad (4th gen), iPad (3rd gen)
IMPORTANT: iOS version 8.0 or higher required
- Android Devices
Android device should have an Android OS version 4.3 and later.
- Probe Dimensions & Weight
- Probe diameter: 5mm
- 1 meter cable
- Probe: 25mm Stainless Steel
- Weight:26g (0.9oz)
|
- iCelsius Wireless Unit
- Dimensions (HxWxD): 89mm x 60mm x 14mm (3.50" x 2.36" x 0.55")
- Weight: 102g (3.60oz)
- Connectors: 10-pin Sensor Connector, microUSB for Charging
- Battery: Integrated 1000mAh Li-Ion Battery
- Wi-Fi Protocols: IEEE 802.11b/g/n
- Wi-Fi Modes Supported: Wi-Fi Direct, Infrastructure, Remote
- Wi-Fi Encryption: WEP, WPA/WPA2 Personal
- On Board Data Storage: 1 Week with a Once/Minute Sampling Rate
- Operating Temperature: 0˚C to 40˚C
- Non-operating Temperature: -30˚C to 70˚C
- Relative Humidity: 10% to 90%
|
- Temperature Measurement
- Range: -40˚C to 125˚C, 0-100% RH
- Display resolution: 0.1˚C / 0.1% RH
- Accuracy: ±0.3˚C typical, RH ±3% typical
- Accuracy: depends on the temperature, can vary from 1°C to 2°C
- Sampling frequency: 2Hz
- User selectable unit (Celsius/Fahrenheit)
|
- Operating & Storage Conditions
- Temperature (probe tip only): -40˚C to 125˚C
- Temperature (whole unit): 0˚ to +35˚C
- Relative humidity (probe tip only): 0% to 100% non condensing
- Relative humidity (whole unit): 5% to 95% non condensing
- Maximum operating altitude: 3000m
- Non operating temperature: -20˚ to 45˚C
|